Surge Tank (3L)

Surge Tank (3L)

Brand: Aftermarket Industries
Product Code: FST3L
Availability: Out Of Stock
Price: $425.00
Ex Tax: $425.00

Available Options

Fuel Distribution Block:

Fuel Pressure Regulator:

Bosch Fuel Pump:


Surge Tank

The Aftermarket Industries 3 litre Dual Port Surge Tank Kit which is perfect for all applications between 200hp-900hp depending on engine type, fuel pressure and fuel type (need help determining the correct Surge Tank/Fuel Pump/Fuel Pressure combination for your particular project & horsepower requirements? Complete the Fuel System Calculator and we will reach out to you directly). Aftermarket Industries surge tanks are made from high grade 4mm 5000 series aluminium and are TIG welded to perfection. The fittings welded to the tanks are precision machined from aircraft grade 6061 aluminium and are designed to provide maximum fuel flow to the rest of your fuel system.

The billet bulkhead located at the top of the surge tank is multi-directional and allows for 8 points of adjustment so you can run your fuel lines in virtually any direction in relation the position of the surge tank.

Need a Fuel Pump? The 3L Aftermarket Industries Dual Port Surge Tank  is designed for up to two (1-2) Bosch Motorsport 044 fuel pumps. PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the quantity you require from the AVAILABLE OPTIONS above - "Bosch Fuel Pump".

Need a 2-to-1 Fuel Distribution Block with Integrated Checkvalves? Simply add our Fuel Converter Block & associated fittings to your order from the AVAILABLE OPTIONS above - "Fuel Distribution Block" - (includes two (2) female/female swivel fittings & two (2) -8AN ORB to -8AN male flare fittings)

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above - "Fuel Pressure Regulator".

Package includes the following items:

  • 3L surge tank (billet bulkhead featutres -8AN ports - 4mm 5005 grade laser cut, cnc folded aluminium tank/6061-T6 billet aluminium bulkhead)
  • Billet twin Bosch 044 bracket set (includes stainless steel fasteners)
  • Two (2) Bosch -8AN inlet fittings
  • Two (2) -8AN Bosch 044 outlet fittings
  • Viton rubber 0-rings included

*Aftermarket Industries products are backed by the worlds largest specialised insurer; Lloyds of London

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied. 

*These tanks MUST not be pressurised, If you plan to use a high volume in-tank fuel pump you MUST use a-8AN fitting as the Overflow fitting located at the top of the surge tank. This will allow the fuel to return back to your fuel tank or fuel cell at the same rate fuel is supplied into the surge tank. Some vehicles may require modification of the OEM fuel pump assembly: If you are unsure, please complete the contact form and we will respond to your questions.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: