Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience
Single Fuel Pump Port
Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 3-to-1 internal fuel pump manifold.
100% Ethanol Compatible
Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process
Quality & Engineering
Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure safety for all motorsport applications
Single Pump: Up to 600hp (depending on Brake Specific Fuel Consumption (BSFC): Please complete the Fuel System Calculator located at the top of the page to determine the best solution based on your specific requirements
Twin Pumps: 600hp to 1200hp (depending on BSFC)
Triple Pumps: 800hp to 1500hp (depending on BSFC)
Need a Fuel Pump? The SPR1000 is designed for upto three (1-3) Walbro 255, 460, 460 Plus and 520 fuel pumps. PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add pump type and the quantity you require to your order from the AVAILABLE OPTIONS above "Walbro Fuel Pump" and we will assemble your SPR1000 surge tank free of charge.
Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".
Need the Correct Electrical Connector? High current fuel pumps such as the Walbro 460, Walbro 520 and Bosch BR540 require a high performance external electrical connector. We now stock the Delphi Apex 2.8mm 6 way connector - see AVAILABLE OPTIONS above "Electrical Connector".
Package includes the following items:
SPR1000 3.2 litre Surge Tank
Billet bulkhead (-8AN ports)
Billet twin (2) or triple (3) fuel pump bracket depending on requirements (includes stainless steel fasterners and Viton rubber insert/s)
Billet push-lock adaptor fittings
Billet fuel pump manifold
Viton rubber o-rings included
E85 compatible fuel pump/bulkhead hose
*Aftermarket Industries products are backed by the worlds largest specialised insurer; Lloyds of London
*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or Aftermarket Industries "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*These tanks MUST not be pressurised, If you plan to use a high pressure in-tank fuel pump you MUST use a-8AN fitting as the Overflow fitting located at the top of the surge tank. This will allow the fuel to return back to your fuel tank or fuel cell at the same rate fuel is supplied into the surge tank.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.