Bosch 1150cc Injector
Bosch 1150cc 3/4 lenght fuel injector made by Bosch; 110lb/hr (1150cc) @ 58psi
*Made in the Bosch factory
*Ford Falcon FG Direct Fit
These injectors flow 110 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and donâ€™t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors â€œpencil streamâ€ high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.
Genuine, reliable Bosch Injectors
Excellent response characteristics
Low Impedance performance characteristics with High Impedance Compatibility
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Spray Cone, (6 hole orifice)
Electrical Connector: EV1/Minitmer
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 58.0PSI (300kPa): 110.0 lb/hr
Overall Length: 50.3mm
Dimensions: 33.5mm o-ring seat to seat, 37.5mm o-ring centerline to centerline
Made for high pressure, harsh environment turbo & supercharged applications!
Bosch 0 280 158 040 (0280158040)